1. Introduction of fixed boarding Bridges

Fixed landing bridge is a special auxiliary equipment to realize rapid loading and unloading of goods. It is installed on the platform and buildings, overlapped on the freight car, and adjusts the height difference between the platform, building floor and the car. The overturning lap switches at the front of the boarding bridge are always attached to the carriage during loading and unloading. The Angle adjustment function of the boarding bridge enables a bridge to be set up between the truck and the building floor. All kinds of moving vehicles can pass the boarding bridge smoothly and transport goods between the building floor and the carriages. And, only one operator work, can realize the fast loading and unloading of goods. It enables enterprises to reduce a large number of labor, improve work efficiency, obtain greater economic benefits. It is the best choice for modern enterprises to produce safely and improve the speed of material circulation.

2. Fixed landing bridge type:

The main types of landing Bridges are platform side landing Bridges and embedded landing Bridges

(1) Embedded boarding bridge:

Embedded embarkation bridge, as the name suggests, refers to the embarkation bridge embedded in the loading and unloading operation platform. The mounted motherboard surface of the embarkation bridge is level with the upper plane of the loading and unloading operation platform. Fully integrated into the platform, it will not affect other tasks on the platform when there is no loading or unloading operation. This type of structure of the boarding bridge is the most widely used, but also relatively fast a kind of auxiliary equipment. Its design is usually well organized in the structural design of the building.

(2) Side boarding bridge:

The platform side embarkation bridge is directly installed at the front edge of the loading and unloading platform. There is no need to excavate or reserve a pit on the loading and unloading operation platform, and the structure of the building is basically unchanged. In the construction of the loading and unloading operation factors are not considered, the platform side loading and unloading bridge function as a remedy scheme, can also meet the requirements of loading and unloading operations into the truck compartment. The platform - side boarding bridge also has a variety of structural forms according to different site conditions. It can also be adjusted upward (below the platform) or downward (below the platform) within a certain range, which can satisfy the installation and use of most loading and unloading platforms.